|
|
|
|
|
GWS GWBLM001 2205/15T Brushless Motor
|
| |
|
Code: M3-BL001
Price: $15.00
Sale: $10.00
|
|
| |
This is a great little affordable brushless motor. We recommend using the GWS GWESC15A 15A Brushless Motor Controller to control it.
This motor comes standard with the mounting accessories pictured.
| Motor Specifications | | GWS MODEL | GWBLM001 | | Nominal Voltage | : 7.4v | | No Load RPM | : 15050 | | No Load A | : 0.77A | | Stall Torque | : 10 oz-in | (68 mN-m) | | Kv | : 2050 rpm/v | | Weight | : 1.07oz | (33g) | | Efficiency | | | RPM - Peak Eff | | | Current - Peak Eff | |
Special Motor Instructions from GWS for this motor - Do not let it run continually for more than 5 minutes when its power reaches 90W
- Do not let it run continually for more than 10 seconds when its power reaches 140W
- It is recommended to use this motor on a 3D airplane with a total flying weight less than 350g (12.36 oz)
- Keep good ventilation for this motor when it is running
- This motor may not work when its temperature goes above 70C (158F )
- Its temperature will go above 40C (104F ) very quickly when its power reaches 90W
- Using a propeller longer than 8040 (8"x4") on this motor is not recommended
- This motor has been tested to work well with 2S 7.4V Li-Po battery pack, and it is strongly recommended to use only 2S 7.4V Li-Po battery pack with this motor
- It is not recommended to reach current draw greater than 12A when a 2S 7.4V LiPo battery pack is used with this motor.
|
|