GWS NARO 6CH FM 75MHz R6NII: JR/Airtronics, Vertical Pin
	Price: $24.50 Sale: $18.38 Code: RX-GWS6-PV
	Quantity:
The NARO R6NII 6 channel Grand Wing Servo (GWS) 75MHz FM surface receivers are great for those applications where you need a couple more channels than the 4 channel 4RPII receivers. They have been used with great success in a broad range of surface remote control applications including robotics, boats, and cars. The GWS receivers are available in multiple configurations so please make sure you get the one that is right for your application. These receivers DO NOT come with a crystal. You must purchase a GWS 75MHz UM-1 Receiver Crystal separately. Specifications Number of Channels : 6 Pin Layout : Vertical Pin layout Shift : Positive Shift for JR/Airtronics Reception System : FM (PPM) single conversion Operating Voltage : 3.6V - 7.2V Current Drain : 7mA Weight : 0.28oz (7.8g) Length : 0.79 in (20.0mm) Width : 1.18 in (30.0mm) Height : 0.37 in (9.5mm) Range : 1000 ft (300 m) Crystal : GWS 75MHz UM-1 Receiver Crystal Bundle Savings Be sure to check out our 4 channel and 6 channel transmitters for great bundle savings. PRECAUTIONS Check that your transmitter and receiver are operating on the same frequency. Check the polarity and integrity of connections when plugging servo connectors into your receiver. Always carry out a range check prior to usage. In order to safely and properly operate your R/C equipment, please read thoroughly All manufacturers manuals and instructions. Always turn the transmitter on first, then the receiver. When you turn the system off, always turn the receiver off first then transmitter. INSTALLATION AND OPERATION CRYSTAL: Only GWS crystals (GWS 75MHz UM-1 Receiver Crystal) work with these receivers RX INSTALLATION: To protect the receiver GWS strongly recommends you wrap it in vibration absorbing foam rubber. When installing your receiver in boats or environments unfriendly to precision electronic equipment; ensure that your receiver is adequately protected from moisture/liquids. Install your receiver in your model and fix it securely. You must select Futaba/Hi-tec for negative shift ( "F" sticker on the receiver ) or JR/Airtronics for positive shift ("J"sticker on the receiver ) , otherwise it will be not operate. RECEIVER ANTENNA: Do not alter the length of antenna or coil it as the range will be reduced. Always carry out a range check prior to usage. Always ensure the receiver antenna is positioned securely and safely in your model. CONNECTION: Check the polarity and integrity of connections when plugging servo connectors into your receiver.

Related Item(s)

Code	Name	Image	Price
TX-GWS06-xx	6 Channel, 75MHz GWS Surface Transmitter Complete 6 channel 75MHz GWS transmitter (Transmitter, crystal, battery, and charger)		$42.00