|
|
|
|
|
Hub, Hex, Series 40, Set Screw, 6mm Bore, 3 Wide
|
| |
|
Code: T40H-SM63
Price:
$5.00 - $3.50
|
|
| |
These hubs are designed to provide a simple, light weight, low profile mounting solution for our wheels with a 1/2" Hex Mount. They are CNC machined Aluminum and feature a durable black oxide finish. The hubs are supplied with mounting hardware as pictured.
These hubs can be used to mount three Series 400 wheels. Mounting three wheels give the ability to increase tread width as well as to mix different durometers or even different diameter wheels.
To mount a wheel with these hubs is a simple three step process:
 | Step 1: | | Slide the hub onto the shaft and lock it in place with the supplied set screw(s).
NOTE: You will need 1/16" hex wrench to tighten the set screw. |  | Step 2: | | Slide the wheels onto the hub. |  | Step 3: | | Place the supplied snap ring in the groove to hold the wheel(s) in place.
NOTE: You will need a pair of external snap ring pliers for this step. |
NOTE: These hubs feature three set screws - use of the second and third set screws is optional. They may be used for extra holding force on a single shaft or to couple two independent shafts within the hub.
| Hub Specifications | | Mounting | : 1/2in Hex | | For Shaft | : 6mm | | Weight* | : 0.36oz | (10.1g) | | Set Screw | : 6-32 x 1/8in | | Num Set Screws | : 3 | | Snap Ring | : 1/2in External | | Material | : Aluminum | | *Weight includes hardware | |
You can find replacement snap rings and set screws as well as machine keys and related tools in Wheel & Hub Accessories
|
|
