|
|
|
|
|
BaneBots Wheel, 4-7/8" x 0.8", 1/2" Hex Mount, 40A, Black/Orange
|
| |
|
Code: T80P-494BO-HS4
Price:
$6.80 - $4.76
|
|
| |
These wheels are constructed with a thermoplastic rubber tread bonded to a polypropylene core making them light weight and durable while providing excellent traction. The variety of sizes and mounting options make it easy to find the wheel that meets your needs. Wheels are available in various tread durometers including soft 30 Shore A green tread, medium 40 Shore A orange tread and relatively hard 50 Shore A blue tread.
 |  | Standard hubs and bushings provide easy mounting of the wheels to a variety of shaft sizes for both drive wheels and casters.
CLICK HERE FOR HUBS AND BUSHINGS to mount these wheels - includes mounting instructions.
|
NOTE: Only T40n-nnn2 hubs and bushings designated as 2 wide can be used with these wheels. The designation of 2 wide for these hubs is in relation to the series 400 wheels, the series 800 wheels are 2 times as wide so they require a 2 wide hub to mount them.
| Wheel Specifications | | Outside Diameter | : 4-7/8 in | (124mm) | | Width | : 0.8 in | (20mm) | | Mount | : 1/2 in hex | | Weight | : 5.02 oz | (142g) | | Color | : Black and Orange | | Tread Durometer | : 40 Shore A | | *Weight may vary | | | *Weight given is average of 10 | |
NOTE: The core of the wheel may contain voids. This is common with this wheel technology and does not normally cause any problems. However, care should be taken if the voids will interfere with any required modifications.
|
|
