P7 Motor Block, RS-5nn Motor P7 Motor Block for most RS-5nn sized motors (RS-540, RS-545, RS-550, RS-555, etc).This block will work with all P7S and P7H gearboxes. MSRP: Was: Now: $9.00
P7 Bearing Block, 1/2 shaft, Single R8 Bearing block with one R8 bearing for a 1/2in shaft. The bearing block matches the P7 gearboxes height and width as well as mounting pattern. In addation to normal uses for a bearing block, this block can be used as an input block for any P7 gearbox. MSRP: Was: Now: $10.00
P7 Motor Block, RS-7nn Motor P7 Motor Block for most RS-7nn sized motors (RS-755, RS-775).This block will work with all P7S and P7H gearboxes. MSRP: Was: Now: $9.00
P7 Shaft, 1/2 x 1-1/2, 4142, Keyway, Endtap P7 Shaft, 1/2in diameter x 1-1/2in long made from 4142 hardened alloy with an 1/8in keyway and a #10-32 end tap.This shaft will work with any P7S or P7H gearbox. MSRP: Was: Now: $9.55
P7 Bearing Block, 1/2 shaft, Dual R8 Bearing block with two R8 bearings for a 1/2in shaft. The bearing block matches the P7 gearboxes height and width as well as mounting pattern. In addation to normal uses for a bearing block, this block can be used as an input block for any P7 gearbox. MSRP: Was: Now: $12.50
P7 Motor Block, RS-5nn or 7nn Motor P7 Motor Block for most RS-5nn sized motors (RS-540, RS-545, RS-550, RS-555, etc) and most RS-7nn sized motors (RS-755, RS-775). This block will work with all P7S and P7H gearboxes. MSRP: Was: Now: $9.00
P7 Shaft, 1/2 x 3, 4142, Keyway, Endtap P7 Shaft, 1/2in diameter x 3in long made from 4142 hardened alloy with an 1/8in keyway and a #10-32 end tap.This shaft will work with any P7S or P7H gearbox. MSRP: Was: Now: $13.15
P7 Motor Block, CIM Motor P7 Motor Block for modified FIRST CIM motor.This block will work with all P7S and P7H gearboxes..NOTEThis block requires the FIRST CIM motor shaft to be cut MSRP: Was: Now: $11.00
P7 Hex Shaft, 1/2 x 1, Stainless, Endtap P7 Hex Shaft, 1/2in across flats x 1in long made from 303 Stainless Steel with a #10-32 end tap.This shaft will work with any P7S or P7H gearbox. MSRP: Was: Now: $8.10
P7 Motor Block, Machinable Stock - 0.30 Thick P7 Motor Block 0.30in thick with stock mounting holes and ready to machine for a custom motor mount.This block will work with all P7S and P7H gearboxes. MSRP: Was: Now: $9.00
P7 Shaft, 1/2 x 1-1/2, 4142, Blank P7 Shaft, 1/2in diameter x 1-1/2in long made from 4142 hardened alloy.Shaft is supplied as a blank with no machining and can be used as is or machined as needed.This shaft will work with any P7S or P7H gearbox. MSRP: Was: Now: $6.55
P7 Hex Shaft, 1/2 x 2, Stainless, Endtap P7 Hex Shaft, 1/2in across flats x 2in long made from 303 Stainless Steel with a #10-32 end tap.This shaft will work with any P7S or P7H gearbox. MSRP: Was: Now: $9.75
P7 Shaft, 1/2 x 3, 4142, Blank P7 Shaft, 1/2in diameter x 3in long made from 4142 hardened alloy.Shaft is supplied as a blank with no machining and can be used as is or machined as needed.This shaft will work with any P7S or P7H gearbox. MSRP: Was: Now: $10.15
P7 Hex Shaft, 1/2 x 3, Stainless, Endtap P7 Hex Shaft, 1/2in across flats x 3in long made from 303 Stainless Steel with a #10-32 end tap.This shaft will work with any P7S or P7H gearbox. MSRP: Was: Now: $11.35
P7 Motor HW Kit, First Stage 3:1, RS-5nn Motor Motor HW Kit for P7 gearboxes with a first stage of 3:1 and a RS-5nn sized motor (RS-540, RS-545, RS-550, RS-555, etc).This kit contains a pinion, 2 screws, and 2 lock washers. This kit does not contain a motor input block. MSRP: Was: Now: $4.50
P7 Motor HW Kit, First Stage 3:1, RS-7nn Motor Motor HW Kit for P7 gearboxes with a first stage of 3:1 and a RS-7nn sized motor (RS-755, RS-775).This kit contains a pinion, 2 screws, and 2 lock washers. This kit does not contain a motor input block. MSRP: Was: Now: $4.50
P7 Motor HW Kit, First Stage 3:1, RS-5nn or 7nn Motor Motor HW Kit for P7 gearboxes with a first stage of 3:1 and a RS-5nn sized motor (RS-540, RS-545, RS-550, RS-555, etc) or a RS-7nn sized motor (RS-755, RS-775). This kit contains a pinion, 2 screws, and 2 lock washers. This kit does not contain a motor... MSRP: Was: Now: $9.60
P7 Pinion, First Stage 3:1, 8mm Shaft, CIM Motor Pinion for P7 gearboxes with a first stage of 3:1 and a motor with a 8mm shaft such as a FIRST CIM motor.Pinion is an interference/press fit. MSRP: Was: Now: $4.00
P7 Motor HW Kit, First Stage 3:1, CIM Motor Motor HW Kit for P7 gearboxes with a first stage of 3:1 and FIRST CIM motorThis kit contains a pinion and 2 screws. This kit does not contain a motor input block.NOTEThis kit requires the motor shaft to be cut MSRP: Was: Now: $4.50
P7 Pinion, First Stage 3:1, Blank Pinion for P7 gearboxes with a first stage of 3:1 ready to machine for shaft. Pinion is spot drilled to ease machining.Pinion is an interference/press fit. MSRP: Was: Now: $4.00
P7 Pinion, First Stage 4:1, 3.2mm Shaft, RS-5nn Motor Pinion for P7 gearboxes with a first stage of 4:1 and a motor with a 3.2mm shaft such as a RS-5nn sized motor (RS-540, RS-545, RS-550, RS-555, etc)Pinion is an interference/press fit. MSRP: Was: Now: $4.00
P7 Motor HW Kit, First Stage 4:1, RS-5nn Motor Motor HW Kit for P7 gearboxes with a first stage of 4:1 and a RS-5nn sized motor (RS-540, RS-545, RS-550, RS-555, etc).This kit contains a pinion, 2 screws, and 2 lock washers. This kit does not contain a motor input block. MSRP: Was: Now: $4.50
P7 Pinion, First Stage 4:1, 5mm Shaft, RS-7nn Motor Pinion for P7 gearboxes with a first stage of 4:1 and a motor with a 5mm shaft such as a RS-7nn sized motor (RS-755, RS-775).Pinion is an interference/press fit. MSRP: Was: Now: $4.00
P7 Motor HW Kit, First Stage 4:1, RS-7nn Motor Motor HW Kit for P7 gearboxes with a first stage of 4:1 and a RS-7nn sized motor (RS-755, RS-775).This kit contains a pinion, 2 screws, and 2 lock washers. This kit does not contain a motor input block. MSRP: Was: Now: $4.50