P8 Pinion, First Stage 3:1, Blank P8 3:1 standard length pinion ready to machine for a custom bore.The maximum recommended bore for this pinion is 0.855 in (21.7mm) for a press fit. Reduce the bore appropriately if using a keyway.This pinion can be used with all P8S, P8H, and P8X... MSRP: Was: Now: $7.00 Add to Cart
P8 Pinion, First Stage 3:1, Blank - Long P8 3:1 long length pinion ready to machine for a custom bore. The longer length is required for full gear engagement on P8X extreme gearboxes.The maximum recommended bore for this pinion is 0.855 in (21.7mm) for a press fit. Reduce the bore... MSRP: Was: Now: $7.00 Add to Cart
P8 Pinion, First Stage 3:1, 8mm Shaft, Slip, 2mm key, CIM P8 3:1 Pinion for a CIM motor or any other motor with an 8mm shaft and a 2mm key. The pinion is a slip fit and must be held in place. The CIM Motor HW kit contains a spacer for this when using it with a CIM motor.This pinion can be used with all P8S,... MSRP: Was: Now: $7.00 Add to Cart
P8 Pinion, First Stage 3:1, 8mm Shaft, Press Fit P8 3:1 Pinion for an 8mm press fit. This pinion can be used with all P8S, P8H, and P8X gearboxes having a first stage of 3:1. MSRP: Was: Now: $10.00
P8 Pinion, First Stage 4:1, Blank P8 4:1 standard length pinion ready to machine for a custom bore.The maximum recommended bore for this pinion is 0.855 in (21.7mm) for a press fit. Reduce the bore appropriately if using a keyway.This pinion can be used with all P8S, P8H, and P8X... MSRP: Was: Now: $5.50 Add to Cart
P8 Pinion, First Stage 4:1, Blank - Long P8 4:1 long length pinion ready to machine for a custom bore. The longer length is required for full gear engagement on P8X extreme gearboxes.The maximum recommended bore for this pinion is 0.855 in (21.7mm) for a press fit. Reduce the bore... MSRP: Was: Now: $5.50 Add to Cart
P8 Pinion, First Stage 4:1, 8mm Shaft, Slip, 2mm key, CIM P8 4:1 Pinion for a CIM motor or any other motor with an 8mm shaft and a 2mm key. The pinion is a slip fit and must be held in place. The CIM Motor HW kit contains a spacer for this when using it with a CIM motor.This pinion can be used with all P8S,... MSRP: Was: Now: $5.50 Add to Cart
P8 Pinion, First Stage 4:1, 8mm Shaft, Press Fit P8 4:1 Pinion for an 8mm press fit. This pinion can be used with all P8S, P8H, and P8X gearboxes having a first stage of 4:1. MSRP: Was: Now: $8.00 Add to Cart