Mounts 1 BaneBots T61 Wheel to a 1/4in threaded shaft.
This is a zero clearance hub with no portion of the hub extending beyond the width of the wheel. This allows for mounting the wheels close to other objects as well as mounting multiple wheels side by side with no space between them.
The hub can be turned onto the shaft and locked into position with a 1/4 inch nut. (not included) If using the set screws, care should be taken to not damage the shaft.
The wheel is fastened to the hub using a standard 3/8 inch snap ring allowing for the easy mounting and changing of wheels.
This is a zero clearance hub with no portion of the hub extending beyond the width of the wheel. This allows for mounting the wheels close to other objects as well as mounting multiple wheels side by side with no space between them.
The hub can be turned onto the shaft and locked into position with a 1/4 inch nut. (not included) If using the set screws, care should be taken to not damage the shaft.
The wheel is fastened to the hub using a standard 3/8 inch snap ring allowing for the easy mounting and changing of wheels.
- Wheel Mounting:
- T61 Hub
- For Shaft:
- 1/4in threaded
- Weight*:
- 0.08 oz
- Num Set Screws:
- 2 (at 90 Deg)
- Set Screw 1:
- 6-32 x 1/8in
- Set Screw 2:
- 6-32 x 1/8in
- Snap Ring:
- 3/8in External
- Material:
- Aluminum
Click arrow in center of image to load and interact with it
1/4in threaded T61 zero clerence hub
2-3/8" T61 wheel with 6mm zero clerence hub (T61H-RM61)