These wheels include a flexible rubber tread that is able to conform to a surface. The softer 30A green rubber will flatten to a surface or bend around an object relatively easily whereas the harder 60A black rubber provides a noticeable amount of resistance with the Orange 40A and Blue 50A rubbers falling in between. These wheels can be used as drive wheels for light robots or as conveyor / intake wheels to handle objects.
Please note, these wheels are not intended for high speed use and have a maximum speed of 3000 rpm.
The hubs have a square and a round portion matching the molded center of the wheels. The center round portion of the wheels is machined after molding to provide a close tolerance fit to the round portion of the hub eliminating the wobble or slop found in many molded wheels. The square portion provides excellent torque transfer from the hub to the wheel and provides room for two set screws placed 90degrees apart to secure the hub to a shaft.
Multiple hub styles are available to mount the wheels to shafts ranging from 2mm to 1/4" .
Please note, these wheels are not intended for high speed use and have a maximum speed of 3000 rpm.
The hubs have a square and a round portion matching the molded center of the wheels. The center round portion of the wheels is machined after molding to provide a close tolerance fit to the round portion of the hub eliminating the wobble or slop found in many molded wheels. The square portion provides excellent torque transfer from the hub to the wheel and provides room for two set screws placed 90degrees apart to secure the hub to a shaft.
Multiple hub styles are available to mount the wheels to shafts ranging from 2mm to 1/4" .
- Outside Diameter:
- 2 in
- Width:
- 0.6 in
- Mount:
- T6 Hub
- Weight*:
- 0.7 oz
- Color:
- Black and Black
- Tread Durometer:
- 60 Shore A
Click arrow in center of image to load and interact with it
2" T61 compliant wheel
2-3/8" T61 wheel with 6mm zero clerence hub (T61H-RM61)
1-7/8" T61 wheel with 1/4in extended hub (T62H-RS41)
