Parts - Page 4 - BaneBots

P6 Motor HW Kit, First Stage 3:1, RS-5nn Motor

MSRP:

Was:

Now: $3.00

Add to Cart
P8 Pinion, First Stage 3:1, 8mm Shaft, Slip, 2mm key, CIM

MSRP:

Was:

Now: $7.00

Add to Cart
P7 Motor HW Kit, First Stage 3:1, RS-5nn or 7nn Motor

MSRP:

Was:

Now: $9.60
P6 Pinion, First Stage 3:1, 5mm Shaft, RS-7nn Motor

MSRP:

Was:

Now: $2.50

Add to Cart
P6 Motor HW Kit, First Stage 3:1, RS-7nn Motor

MSRP:

Was:

Now: $3.00

Add to Cart
P8 Pinion, First Stage 3:1, 8mm Shaft, Press Fit

MSRP:

Was:

Now: $10.00
P7 Pinion, First Stage 3:1, 8mm Shaft, CIM Motor

MSRP:

Was:

Now: $4.00
P7 Motor HW Kit, First Stage 3:1, CIM Motor

MSRP:

Was:

Now: $4.50
P6 Motor HW Kit, First Stage 3:1, RS-5nn or 7nn Motor

MSRP:

Was:

Now: $3.00

Add to Cart
P7 Pinion, First Stage 3:1, Blank

MSRP:

Was:

Now: $4.00
P6 Motor HW Kit, First Stage 3:1, CIM Motor

MSRP:

Was:

Now: $6.80
P6 Pinion, First Stage 3:1, Blank

MSRP:

Was:

Now: $2.50

Add to Cart
P8 Pinion, First Stage 4:1, Blank

MSRP:

Was:

Now: $5.50

Add to Cart
P8 Motor HW Kit, First Stage 4:1, CIM Motor

MSRP:

Was:

Now: $7.50

Add to Cart
P7 Pinion, First Stage 4:1, 3.2mm Shaft, RS-5nn Motor

MSRP:

Was:

Now: $4.00
P7 Motor HW Kit, First Stage 4:1, RS-5nn Motor

MSRP:

Was:

Now: $4.50
P6 Pinion, First Stage 4:1, 2.3mm Shaft, RS-3nn Motor

MSRP:

Was:

Now: $2.50

Add to Cart
P6 Motor HW Kit, First Stage 4:1, RS-3nn Motor

MSRP:

Was:

Now: $3.00

Add to Cart
P8 Pinion, First Stage 4:1, Blank - Long

MSRP:

Was:

Now: $5.50

Add to Cart
P7 Pinion, First Stage 4:1, 5mm Shaft, RS-7nn Motor

MSRP:

Was:

Now: $4.00
P7 Motor HW Kit, First Stage 4:1, RS-7nn Motor

MSRP:

Was:

Now: $4.50
P6 Pinion, First Stage 4:1, 3.2mm Shaft, RS-5nn Motor

MSRP:

Was:

Now: $2.50

Add to Cart
P6 Motor HW Kit, First Stage 4:1, RS-5nn Motor

MSRP:

Was:

Now: $3.00

Add to Cart
P8 Pinion, First Stage 4:1, 8mm Shaft, Slip, 2mm key, CIM

MSRP:

Was:

Now: $5.50

Add to Cart

P6 Motor HW Kit, First Stage 3:1, RS-5nn Motor

Motor HW Kit for P6 gearboxes with a first stage of 3:1 and a RS-5nn sized motor (RS-540, RS-545, RS-550, RS-555, etc).This kit contains a pinion, 2 screws, and 2 lock washers. This kit does not contain a motor input block.

MSRP:

Was:

Now: $3.00

Add to Cart
P8 Pinion, First Stage 3:1, 8mm Shaft, Slip, 2mm key, CIM

P8 3:1 Pinion for a CIM motor or any other motor with an 8mm shaft and a 2mm key. The pinion is a slip fit and must be held in place. The CIM Motor HW kit contains a spacer for this when using it with a CIM motor.This pinion can be used with all P8S,...

MSRP:

Was:

Now: $7.00

Add to Cart
P7 Motor HW Kit, First Stage 3:1, RS-5nn or 7nn Motor

Motor HW Kit for P7 gearboxes with a first stage of 3:1 and a RS-5nn sized motor (RS-540, RS-545, RS-550, RS-555, etc) or a RS-7nn sized motor (RS-755, RS-775). This kit contains a pinion, 2 screws, and 2 lock washers. This kit does not contain a motor...

MSRP:

Was:

Now: $9.60
P6 Pinion, First Stage 3:1, 5mm Shaft, RS-7nn Motor

Pinion for P6 gearboxes with a first stage of 3:1 and a motor with a 5mm shaft such as a RS-7nn sized motor (RS-755, RS-775).Pinion is an interference/press fit.

MSRP:

Was:

Now: $2.50

Add to Cart
P6 Motor HW Kit, First Stage 3:1, RS-7nn Motor

Motor HW Kit for P6 gearboxes with a first stage of 3:1 and a RS-7nn sized motor (RS-755, RS-775).This kit contains a pinion, 2 screws, and 2 lock washers. This kit does not contain a motor input block.

MSRP:

Was:

Now: $3.00

Add to Cart
P8 Pinion, First Stage 3:1, 8mm Shaft, Press Fit

P8 3:1 Pinion for an 8mm press fit. This pinion can be used with all P8S, P8H, and P8X gearboxes having a first stage of 3:1.

MSRP:

Was:

Now: $10.00
P7 Pinion, First Stage 3:1, 8mm Shaft, CIM Motor

Pinion for P7 gearboxes with a first stage of 3:1 and a motor with a 8mm shaft such as a FIRST CIM motor.Pinion is an interference/press fit.

MSRP:

Was:

Now: $4.00
P7 Motor HW Kit, First Stage 3:1, CIM Motor

Motor HW Kit for P7 gearboxes with a first stage of 3:1 and FIRST CIM motorThis kit contains a pinion and 2 screws. This kit does not contain a motor input block.NOTEThis kit requires the motor shaft to be cut

MSRP:

Was:

Now: $4.50
P6 Motor HW Kit, First Stage 3:1, RS-5nn or 7nn Motor

Motor HW Kit for P6 gearboxes with a first stage of 3:1 and a RS-5nn sized motor (RS-540, RS-545, RS-550, RS-555, etc) or a RS-7nn sized motor (RS-755, RS-775). This kit contains a pinion, 2 screws, and 2 lock washers. This kit does not contain a motor...

MSRP:

Was:

Now: $3.00

Add to Cart
P7 Pinion, First Stage 3:1, Blank

Pinion for P7 gearboxes with a first stage of 3:1 ready to machine for shaft. Pinion is spot drilled to ease machining.Pinion is an interference/press fit.

MSRP:

Was:

Now: $4.00
P6 Motor HW Kit, First Stage 3:1, CIM Motor

Motor HW Kit for P6 gearboxes with a first stage of 3:1 and FIRST CIM motorThis kit contains a pinion and 2 screws. This kit does not contain a motor input block.NOTEThis kit requires the motor shaft to be cut

MSRP:

Was:

Now: $6.80
P6 Pinion, First Stage 3:1, Blank

Pinion for P6 gearboxes with a first stage of 3:1 ready to machine for shaft. Pinion is spot drilled to ease machining.Pinion is an interference/press fit.

MSRP:

Was:

Now: $2.50

Add to Cart
P8 Pinion, First Stage 4:1, Blank

P8 4:1 standard length pinion ready to machine for a custom bore.The maximum recommended bore for this pinion is 0.855 in (21.7mm) for a press fit. Reduce the bore appropriately if using a keyway.This pinion can be used with all P8S, P8H, and P8X...

MSRP:

Was:

Now: $5.50

Add to Cart
P8 Motor HW Kit, First Stage 4:1, CIM Motor

P8 Motor HW Kit to mount an unmodified FIRST CIM motor with an 8mm shaft and a 2mm key to a P8 gearbox with a first stage of 4:1.This kit contains a pinion, spacer and screws. This kit does not contain a motor input block.

MSRP:

Was:

Now: $7.50

Add to Cart
P7 Pinion, First Stage 4:1, 3.2mm Shaft, RS-5nn Motor

Pinion for P7 gearboxes with a first stage of 4:1 and a motor with a 3.2mm shaft such as a RS-5nn sized motor (RS-540, RS-545, RS-550, RS-555, etc)Pinion is an interference/press fit.

MSRP:

Was:

Now: $4.00
P7 Motor HW Kit, First Stage 4:1, RS-5nn Motor

Motor HW Kit for P7 gearboxes with a first stage of 4:1 and a RS-5nn sized motor (RS-540, RS-545, RS-550, RS-555, etc).This kit contains a pinion, 2 screws, and 2 lock washers. This kit does not contain a motor input block.

MSRP:

Was:

Now: $4.50
P6 Pinion, First Stage 4:1, 2.3mm Shaft, RS-3nn Motor

Pinion for P6 gearboxes with a first stage of 4:1 and a motor with a 2.3mm shaft such as a RS-3nn sized motor (RS-380, RS-385, RS-390, RS-395, etc).Pinion is an interference/press fit.

MSRP:

Was:

Now: $2.50

Add to Cart
P6 Motor HW Kit, First Stage 4:1, RS-3nn Motor

Motor HW Kit for P6 gearboxes with a first stage of 4:1 and a RS-3nn sized motor (RS-380, RS-385, RS-390, RS-395, etc).This kit contains a pinion, 2 screws, and 2 lock washers. This kit does not contain a motor input block.

MSRP:

Was:

Now: $3.00

Add to Cart
P8 Pinion, First Stage 4:1, Blank - Long

P8 4:1 long length pinion ready to machine for a custom bore. The longer length is required for full gear engagement on P8X extreme gearboxes.The maximum recommended bore for this pinion is 0.855 in (21.7mm) for a press fit. Reduce the bore...

MSRP:

Was:

Now: $5.50

Add to Cart
P7 Pinion, First Stage 4:1, 5mm Shaft, RS-7nn Motor

Pinion for P7 gearboxes with a first stage of 4:1 and a motor with a 5mm shaft such as a RS-7nn sized motor (RS-755, RS-775).Pinion is an interference/press fit.

MSRP:

Was:

Now: $4.00
P7 Motor HW Kit, First Stage 4:1, RS-7nn Motor

Motor HW Kit for P7 gearboxes with a first stage of 4:1 and a RS-7nn sized motor (RS-755, RS-775).This kit contains a pinion, 2 screws, and 2 lock washers. This kit does not contain a motor input block.

MSRP:

Was:

Now: $4.50
P6 Pinion, First Stage 4:1, 3.2mm Shaft, RS-5nn Motor

Pinion for P6 gearboxes with a first stage of 4:1 and a motor with a 3.2mm shaft such as a RS-5nn sized motor (RS-540, RS-545, RS-550, RS-555, etc)Pinion is an interference/press fit.

MSRP:

Was:

Now: $2.50

Add to Cart
P6 Motor HW Kit, First Stage 4:1, RS-5nn Motor

Motor HW Kit for P6 gearboxes with a first stage of 4:1 and a RS-5nn sized motor (RS-540, RS-545, RS-550, RS-555, etc).This kit contains a pinion, 2 screws, and 2 lock washers. This kit does not contain a motor input block.

MSRP:

Was:

Now: $3.00

Add to Cart
P8 Pinion, First Stage 4:1, 8mm Shaft, Slip, 2mm key, CIM

P8 4:1 Pinion for a CIM motor or any other motor with an 8mm shaft and a 2mm key. The pinion is a slip fit and must be held in place. The CIM Motor HW kit contains a spacer for this when using it with a CIM motor.This pinion can be used with all P8S,...

MSRP:

Was:

Now: $5.50

Add to Cart