Mounts 1 BaneBots T61 Wheel to a 1/4in threaded shaft.
This is an extended hub with the hub extending outside the width of the wheels so that the set screws can be accessed while the wheel is mounted. This allows mounting the wheels to the hub prior to mounting the hub to the shaft.
The hub can be turned onto the shaft and locked into position with a 1/4 inch nut. (not included) If using the set screws, care should be taken to not damage the shaft.
The wheel is fastened to the hub using a standard 3/8 inch snap ring allowing for the easy mounting and changing of wheels.
This is an extended hub with the hub extending outside the width of the wheels so that the set screws can be accessed while the wheel is mounted. This allows mounting the wheels to the hub prior to mounting the hub to the shaft.
The hub can be turned onto the shaft and locked into position with a 1/4 inch nut. (not included) If using the set screws, care should be taken to not damage the shaft.
The wheel is fastened to the hub using a standard 3/8 inch snap ring allowing for the easy mounting and changing of wheels.
- Wheel Mounting:
- T61 Hub
- For Shaft:
- 1/4in threaded
- Weight*:
- 0.13 oz
- Num Set Screws:
- 2 (at 90 Deg)
- Set Screw 1:
- 6-32 x 1/8in
- Set Screw 2:
- 6-32 x 1/8in
- Snap Ring:
- 3/8in External
- Material:
- Aluminum
Click arrow in center of image to load and interact with it
1/4in threaded T61 extended hub
1-7/8" T61 wheel with 1/4in extended hub (T62H-RS41)